TPEE Dryer & VOC Cleaner

Nkọwa dị mkpirikpi:

Sistemụ ihicha infrared maka nrụpụta polymer

The infrared preheating devolatilization usoro tumadi kpo oku ihe na-abanye n'ụlọ kpo oku site kpọmkwem infrared radieshon.Mgbe ihe ahụ rutere n'okpomọkụ a tọhapụrụ, ọ na-abanye na modul devolatilization na-adịghị ahụ anya maka ọgwụgwọ agụụ, na phenol na-agbanwe agbanwe nke ihe ọkụ ahụ wepụtara.

>> Ogologo oge dị elu na nkwụsị ngwa ngwa

>> Ọnọdụ ihicha na-agbanwe agbanwe, na-ekpo ọkụ nke ọma.Ngwunye ihe dị mma, enweghị agglomeration

>> Oke arụmọrụ na nchekwa ike, na-echekwa ihe karịrị 60% nke oriri ike

>>Ọdịnaya nke phenol na-agbanwe agbanwe na ihe mmepụta erughị 10ppm

>> Ọdịdị dị mfe, dị mfe ihicha, ngwa ngwa mgbanwe ngwaahịa

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ihe nlele ngwa

Akụrụngwa	Pellets TPE nke SK Chemical
Iji Igwe	LDHW-1200*1000
Mmiri mbụ	1370 ppm Nwalere site na German Sartorius Moisture test ngwá ọrụ
Ntọala okpomọkụ ihicha	120 ℃ (ihe na-ekpo ọkụ n'ezie n'oge nhazi ihicha)
Etinyere oge ihicha	Nkeji 20
Mmiri ikpeazụ	30ppm Nwalere site na German Sartorius Moisture test ngwá ọrụ
Ngwaahịa ikpeazụ	TPE akpọnwụ akpọnwụ enweghị mgbakasị, enweghị pellets na-arapara

Otu esi arụ ọrụ

>> Na nzọụkwụ mbụ, naanị ihe mgbaru ọsọ bụ iji kpoo ihe ahụ ka ọ bụrụ ọnọdụ okpomọkụ.

Nabata ọsọ ọsọ nke drum na-agbagharị, ike ọkụ infrared nke igwe nkụ ga-adị n'ogo dị elu, mgbe ahụ, pellets PETG ga-ekpo ọkụ ngwa ngwa ruo mgbe okpomọkụ ga-ebili na okpomọkụ nke preset.

>> ihicha nzọụkwụ

Ozugbo ihe ahụ rutere na okpomọkụ, a ga-amụba ọsọ nke drum na ọsọ ọsọ na-agbagharị agbagharị dị elu ka ọ ghara ịchịkọta ihe ahụ.N'otu oge ahụ, ike ọkụ infrared ga-abawanye ọzọ iji mechaa ihicha.Mgbe ahụ, a ga-ebelata ọsọ na-agbagharị drum ọzọ.Nọmalị, usoro ihicha ga-agwụ mgbe 15-20mins.(Oge oge na-adabere na ihe onwunwe)

>> Mgbe emechara nhazi ihicha, IR Drum ga-ewepụta ihe ahụ na-akpaghị aka ka ọ bụrụ sistemu delatilization maka VOC Wepụ.

>> Devolatilisation Sistemu maka iwepụ VOC

The infrared devolatilization usoro tumadi nọgidere na-ekpo ọkụ ihe site infrared radieshon na kpọmkwem wavelength, mgbe ihe na-ekpo ọkụ ruo a preset okpomọkụ ihe a ga-eri nri na Vacuum devolatilization usoro maka ugboro ugboro vacuumization devolatilization, n'ikpeazụ volatiles nke ewepụtara site na. A na-ewepụ ihe ọkụ ọkụ site na sistemụ Vacuum.Na ọdịnaya okwu na-agbanwe agbanwe nwere ike ịbụ <10ppm

Uru Anyị

1	Oriri ike dị ala	Oriri ike dị ntakịrị ma e jiri ya tụnyere usoro ọdịnala, site na ntinye aka ozugbo nke ike infrared na ngwaahịa ahụ
2	Nkeji kama awa	Ngwaahịa a na-anọ naanị nkeji ole na ole na usoro ihicha wee dị maka usoro mmepụta ọzọ.
3	Ngwa ngwa	Usoro mmepụta nwere ike ịmalite ozugbo ịmalite.Achọghị usoro ikpo ọkụ nke igwe.
4	Nwayọọ nwayọọ	A na-ekpo ọkụ nke ọma site n'ime ime n'èzí ma ghara ibu ya n'èzí ruo ọtụtụ awa na okpomọkụ, ma si otú ahụ mebie ya.
5	N'otu nzọụkwụ	Crystallization na ihicha na otu nzọụkwụ
6	Mmụba abawanyela	Mmụba nke mmepụta ihe ọkụkụ site na mbelata ibu na extruder
7	Ọ dịghị clumping, dịghị ịrapara	Ntughari nke drum na-eme ka a na-emegharị ihe mgbe niile. Ihe mkpuchi gburugburu na ngwakọta agwakọta emebere maka ngwaahịa gị na-eme ka ngwakọta ihe dị mma ma na-ezere ịchịkọta.Ngwaahịa na-ekpo ọkụ nke ọma
8	Siemens PLC akara	Njikwa.A na-enyocha data usoro, dị ka ihe na ikpochapụ ikuku ikuku ma ọ bụ ọkwa njuputa site na ihe mmetụta na pyrometers.Ngbanwe na-akpalite mgbanwe akpaaka. Mmụgharị.Enwere ike ịchekwa nri na usoro usoro n'ime sistemụ njikwa iji hụ na nsonaazụ kacha mma na nke enwere ike imepụtaghachi. Ndozi anya.Ọrụ ịntanetị site na modem.

Foto igwe

Ngwa igwe

Ịkpọ nkụ	Ihicha granulates rọba (PET, TPE, PETG, APET, RPET, PBT, ABS/PC, HDPE, LCP, PC, PP, PVB, WPC, TPU wdg) yana ọtụtụ ihe ndị ọzọ na-asọ asọ.
Crystallization	PET (Klas flakesm granulates, mpempe akwụkwọ), PET Masterbatch, CO-PET, PBT, PEEK, PLA, PPS wdg
Dị iche iche	Haziri thermal maka iwepụ oligomeren izu ike na ihe ndị na-agbanwe agbanwe

Nnwale efu

Anyị factory nwere wu Test Center.N'ime ụlọ nyocha anyị, anyị nwere ike ịme nnwale na-aga n'ihu ma ọ bụ kwụsịchaa maka ihe nlele ndị ahịa.Ejiri akụrụngwa akpaaka zuru oke yana teknụzụ nha.

• Anyị nwere ike igosi --- Nbugharị / Ibunye, ihicha & Crystallization, Ntupu.

• ihicha na kristal nke ihe iji chọpụta mmiri fọdụrụnụ, oge obibi, ntinye ike na ihe onwunwe.

• Anyị nwekwara ike igosi arụmọrụ site n'inweta nkwekọrịta maka obere batches.

• Dị ka ihe onwunwe na mmepụta ihe chọrọ, anyị nwere ike ịdepụta atụmatụ gị.

Injinia nwere ahụmahụ ga-eme ule ahụ.A na-akpọ ndị ọrụ gị nke ọma ka ha sonye na ụzọ nkwonkwo anyị.N'ihi ya, ị nwere ma ekwe omume inye aka ifịk ifịk na ohere n'ezie ịhụ anyị ngwaahịa na-arụ ọrụ.