Plastic resin draya

Nkọwa dị mkpirikpi:

griiz plastik na-ehicha nke ọma: PET Flake / Pellets, Chips PET, PETG, PET Masterbatch, PLA, PBAT, PPS, PET composite material (GAG), PC, PA6 (66), SURLYN wdg.

Mkpa oge ihicha: 15-20 nkeji
ihicha&cystallization: N'otu nzọụkwụ
Oriri ike: 0.06-0.08kwh/kg
Isi iyi ọkụ: Infrared Radiator

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ihe nlele ngwa

Akụrụngwa	PET Resin CR-BrightMaka ngwugwu nri
Iji Igwe	LDHW-600*1000
Mmiri mbụ	2210 ppmNwalere site na German Sartorius Moisture test ngwá ọrụ
Ntọala okpomọkụ ihicha	200 ℃
Etinyere oge ihicha	Nkeji 20
Mmiri ikpeazụ	20ppmNwalere site na German Sartorius Moisture test ngwá ọrụ
Ngwaahịa ikpeazụ	PET resin akpọnwụghị, enweghị pellets na-arapara n'ahụ

Otu esi arụ ọrụ

>>Na nzọụkwụ mbụ, naanị ihe mgbaru ọsọ bụ ikpo ọkụ na ihe a na-etinye na okpomọkụ.

Nabata ọsọ ọsọ nke drum na-agbagharị ngwa ngwa, ike ọkụ infrared nke igwe nkụ ga-adị n'ogo dị elu, mgbe ahụ pellet PET ga-ekpo ọkụ ngwa ngwa ruo mgbe okpomọkụ ga-ebili na okpomọkụ nke preset.

>> ihicha nzọụkwụ

Ozugbo ihe ahụ rutere na okpomọkụ, a ga-amụba ọsọ nke drum na ọsọ ọsọ na-agbagharị agbagharị ka ọ dị elu iji zere nkwụsị nke ihe ahụ. N'otu oge ahụ, ike ọkụ infrared ga-abawanye ọzọ iji mechaa ihicha. Mgbe ahụ, a ga-ebelata ọsọ na-agbagharị drum ọzọ. Nọmalị, usoro ihicha ga-agwụ mgbe 15-20mins. (Oge oge na-adabere na ihe onwunwe)

>> Mgbe emechara nhazi ihicha, IR Drum ga-ewepụta ihe ahụ ozugbo wee mejupụta drum maka okirikiri ọzọ.

Ntugharị akpaka yana parampat niile dị mkpa maka rampụ okpomọkụ dị iche iche na-ejikọta ya na njikwa ihuenyo mmetụ ọgbara ọhụrụ. Ozugbo achọpụtara paramita na profaịlụ okpomọkụ maka otu ihe, enwere ike ịchekwa ntọala thes dị ka ntụziaka na sistemụ njikwa.

Uru Anyị

1	Oriri ike dị ala	Oriri ike dị ntakịrị ma e jiri ya tụnyere usoro nkịtị, site na ntinye aka ozugbo nke ike infrared na ngwaahịa ahụ
2	Nkeji kama awa	Ngwaahịa a na-anọ naanị nkeji ole na ole na usoro ihicha wee dị maka usoro mmepụta ọzọ.
3	Ngwa ngwa	Usoro mmepụta nwere ike ịmalite ozugbo ịmalite. Achọghị usoro ikpo ọkụ nke igwe.
4	Nwayọọ nwayọọ	A na-ekpo ọkụ nke ọma site n'ime ime n'èzí ma ghara ibu ya n'èzí ruo ọtụtụ awa na okpomọkụ, ma si otú ahụ mebie ya.
5	N'otu nzọụkwụ	Crystallization na ihicha na otu nzọụkwụ
6	Mmụba abawanyela	Mmụba nke mmepụta ihe ọkụkụ site na mbelata ibu na extruder
7	Ọ dịghị clumping, dịghị ịrapara	Ntughari nke drum na-eme ka ihe na-aga n'ihu na-aga n'ihu na-aga n'ihu. Ihe mkpuchi gburugburu na ihe ndị na-agwakọta ihe ndị e mere maka ngwaahịa gị na-eme ka ngwakọta dị mma nke ihe dị mma ma na-ezere nkwụsị. Ngwaahịa na-ekpo ọkụ nke ọma
8	Siemens PLC akara	Control.A na-enyocha data usoro, dị ka ihe onwunwe na ikpochapụ ikuku ikuku ma ọ bụ ọkwa njupụta na-aga n'ihu site na sensọ na pyrometers. Ngwongwo na-akpalite mgbanwe akpaaka.Reproducibility.Enwere ike ịchekwa usoro ihe omume na usoro nhazi na usoro nchịkwa iji hụ na nsonaazụ kacha mma na nke a pụrụ imepụtaghachi. Ndozi anya. Ọrụ ntanetị site na modem.
9	Oge ihicha chọrọ naanị 20mins, mmiri ikpeazụ nwere ike ịbụ ≤ 30ppm		Ụzarị infrared nke na-abanye ma na-atụgharị uche site na ihe onwunwe adịghị emetụta nhazi nke ihe ahụ, ma anụ ahụ na-etinye aka na ya ga-agbanwe n'ime ike ọkụ n'ihi mkpali molekụla, nke na-eme ka okpomọkụ nke ihe na-ebili.
10	Ọ dịghị clumping, dịghị ịrapara		Ntughari nke drum na-eme ka ihe na-aga n'ihu na-aga n'ihu na-aga n'ihu. Ihe mkpuchi gburugburu na ihe ndị na-agwakọta ihe ndị e mere maka ngwaahịa gị na-eme ka ngwakọta dị mma nke ihe dị mma ma na-ezere nkwụsị. Ngwaahịa na-ekpo ọkụ nke ọma
11	Ọ dị mfe ọcha ma gbanwee ihe		Ịnweta ihe niile dị mma na-enye ohere maka nhicha dị mfe na ngwa ngwa.Ngbanwe ngwa ngwa ngwaahịa.

Foto igwe

Ngwa igwe

ihicha ihicha nke plastic granulates (PET,TPE, PETG, APET, RPET, PBT, ABS/PC, HDPE, LCP, PC, PP, PVB,WPC,TPU wdg) yana ndị ọzọ free-eru nnukwu ihe.

Crystallization PET (Bottle flakesm granulates, mpempe akwụkwọ scrap), PET Masterbatch, CO-PET, PBT, PEEK, PLA, PPS wdg

A na-ahazi okpomọkụ dị iche iche maka iwepụ oligomeren izu ike na ihe ndị na-agbanwe agbanwe

Nnwale efu

Injinia nwere ahụmahụ ga-eme ule ahụ. A na-akpọ ndị ọrụ gị nke ọma ka ha sonye na ụzọ nkwonkwo anyị. N'ihi ya, ị nwere ma ekwe omume inye aka ifịk ifịk na ohere n'ezie ịhụ anyị ngwaahịa na-arụ ọrụ.